DigiPlus

List of contents of this article:

• 1,Raspberry Pi uefiwin10 Start
• 2, How to install Raspberry Pi
• 3, Duffy System Installation Tutorial
• 4、Raspberry Pi Install Clion

Raspberry pie uefiwin10 startup

Get the appropriate installation media (system CD or DigiPlusUSB flash drive). The official Windows 10 system CD has supported the installation of UEFI. Start the computer with your installation media. You may need to modify some advanced startup-related options for your computer.

UEFI is matched with the system. Generally, the installation version of the CD will be set by itself. If it is the ghost version, it generally cannot start normally.The best way is to directly download the installed CD image and activate it after installation.

Solution 1: After the above problem occurs, directly unplug the USB flash drive and plug it into another computer, delete the efi folder and bootmgr.efi file in the USB flash drive, and the problem will be solved. Then, use this USB flash drive boot disk to install the system, and this problem will not occur.

The startup item in BIOS will become Windows boot manager, which is the UEFI startup item of win8. If it can't be turned on, please check the BIOS settings, whether there is a startup item of windows boot manager, and move it to the first place.

F10]; We press the keyAfter the function key [F10] on the disk, pop up the storage and leave the BIOS setting dialog box, default [yes], and then press the return key on the keyboard; leave the BIOS settings and restart the computer. At this point, the Windows 10 system has been set to turn on UEFI mode in the BIOS.

The win10 operating system is installed, but it cannot be turned on, and this page appears. According to the prompts below, pressing F8 is not available at all. You can only "press esc to specify UEFI firmware settings". Press esc on the keyboard to enter the motherboard settings. Click "Bootmenu (F8)". The interface appears.

How to install the Raspberry Pi

First, insert the SD card with the installed system into the Raspberry Pi, and then connect the keyboard and mouse of the USB interface to the Raspberry Pi, connect the HDMI cable, connect the power cord, and turn on the power. Enter startx on the keyboard to start the graphic interface. That's it. Your tree The berry pi will start normally.

There is no installation step for the network card driver when installing Debian on Raspberry Pi. The following steps solve the problem: First, make sure that the operating system of Raspberry Pi has been installed correctly and can start normally.Confirm your network card model, and you can find relevant information about the network card model on Raspberry Pi.

You can download the LabVIEW version for Raspberry Pi from the official website of NationalInstruments (NI) and install it according to the installation instructions. Configure network connection: Make sure that Raspberry Pi is connected to the computer running LabVIEW in the same local area network for communication and data transmission.

Install Thonny, open the software after installation, open Tools-Settings-Interpreter, select MicroPython (Raspberry Pi Pico) interpreter, and select the serial slogan of Raspberry Pi PICO at the serial port (if the board has When connected to the computer, the software generally automatically detects serial slogans).

Duffy System Installation Tutorial

1. Download the latest version of Duffy system and save it in the disk. Insert the disk into the HP thin client, and then turn on and install the Duffin system. Follow the installation prompts and install it step by step.

2. Download the ISO image file of the Dafei system and write it to the USB flash drive or DVD disc. Insert the USB flash drive or DVD disc into the Wyxe Dell computer and start the computer. Press the F2 or F12 key at startup to enter the BIOS settings.

3. Installation method: download daphile-64-rt, rufus or USBWriter.

4. The steps to install the decoder driver of this system are as follows: connect the software to the computer, and the computer will automatically read the installation wizard. After the installation of the missile, select the advanced installation option. After confirming that it is correct, click Next and select to include this position 0 in the search in the new pop-up serial port.

Raspberry Pi installs Clion

Because the official system of Raspberry Pi itself belongs to the linux system, there is no need to install unbutu (it is not worth it to consume too much), and directly use Raspberry Pi to provide The official system can complete the relevant operations of linux.

· The WiFi/BT module supports external antennas and is removable, which means that as long as the driver supports it, the module with better performance can be replaced.

Linux system can be installed. Linux system installation tutorial: First, use the optical drive or USB flash drive or the LinuxISO file you downloaded to install.

Don't pretend. Raspberry Pi refers to RaspberryPi, which is a microcomputer based on ARM architecture. Its performance and configuration are very different from those of personal computers. Installing Windows 10 on Raspberry Pi will cause stuttering.